How the build cost is worked out
The estimate prices each part of the house by area, adds the extras that sit outside the builder's per-square-metre rate, then adds a contingency.
Building cost = AL × R × m + AG × RG + AA × RA
AL is the living area, R the base rate per m², and m the finish multiplier (Basic 0.85, Standard 1.0, High-end 1.5 by default, all assumptions you can change). AG and RG are the garage area and rate, AA and RA the alfresco area and rate. Garages and alfresco areas have no internal linings, wet areas or joinery, so they cost much less per m² than living space and are priced separately. In one-total-area mode the whole area is priced at R × m.
Total = (Building cost + Extras) × (1 + c ÷ 100)
Each extra is either a fixed dollar amount or a percentage of the building cost, and c is the contingency percentage. The cost per m² shown is the total divided by all the floor area you entered, garage and alfresco included.
Where the default base rate comes from
The Australian Bureau of Statistics (ABS) publishes the number and value of new houses approved each month in Building Approvals, Australia. This page uses the September 2026 release, published in November 2026, read through the ABS Data API (dataflow BA_GCCSA, original series, all sectors, new houses) on 19 November 2026. For each state it adds up the twelve months from October 2025 to September 2026:
Average value per house = value of new houses approved ÷ number of new houses approved
For New South Wales that is $14,624,992,000 ÷ 25,621 = $570,820.50 per house, and for Australia as a whole $65,572,368,000 ÷ 125,216 = $523,674.04. The other averages are Victoria $535,787.46, Queensland $533,378.58, South Australia $442,431.46, Western Australia $485,130.85, Tasmania $433,100.94, the Northern Territory $534,206.95 and the ACT $552,214.37.
Base rate R = average value per house ÷ average floor area
The ABS does not publish an average floor area alongside these figures, so the calculator asks you for one rather than inventing it. The ABS defines the value as the estimated value of the building work when completed, as reported on the approval. It excludes land and, conceptually, demolition and landscaping, but includes site preparation, and includes GST. For many project homes the reported value is the contract price, which can include some site works and landscaping, so treat the derived rate as an all-in average. Northern Territory and ACT averages rest on fewer than 1,000 houses a year and move more from month to month.
ABS material is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). Source: Australian Bureau of Statistics, Building Approvals, Australia, September 2026.
Worked example: a New South Wales house
Suppose you judge that a typical new house near you has 230 m² of floor area. That figure is your assumption for the example, not an ABS statistic.
- Base rate. $570,820.50 ÷ 230 = $2,481.83 per m². At Standard finish the multiplier is 1.0, so the living-area rate stays $2,481.83.
- Living area. 180 m² × $2,481.83 = $446,729.09.
- Garage and alfresco. 36 m² × $1,000 = $36,000 and 20 m² × $1,200 = $24,000. Building cost: $446,729.09 + $36,000 + $24,000 = $506,729.09.
- Extras. Design fees at 3% are 0.03 × $506,729.09 = $15,201.87. With site works $20,000, driveway $8,000, landscaping $10,000, council fees $3,000 and certification $3,000 the extras come to $59,201.87.
- Before contingency. $506,729.09 + $59,201.87 = $565,930.96.
- Contingency. 10% is $56,593.10, giving a total of $622,524.05.
- Per m². The house has 180 + 36 + 20 = 236 m² under roof, so $622,524.05 ÷ 236 = $2,637.81 per m² overall, or $3,458.47 per m² of living area.
At High-end finish the living-area rate becomes $2,481.83 × 1.5 = $3,722.74 per m², and at Basic $2,481.83 × 0.85 = $2,109.55.
Reading the result
The floor area you divide by matters most. Dividing the same ABS value by 200 m² instead of 230 m² raises the rate by 15%. If your estimate of a typical house includes the garage, use the one-total-area mode, or the garage will be counted twice.
Watch for double counting. The ABS value can include site preparation, and builders' quotes often include a basic driveway or landscaping package. Set an extra to 0 if your rate already covers it.
Approval values are estimates made before building starts. The ABS notes they are usually a reliable guide to the completed value of houses, but they are averages across project homes and custom builds, flat and sloping blocks, cities and regions. A steep or rocky block, bushfire or flood requirements, a long service connection or a two-storey design can each move a real quote well away from the average.
What is excluded. Land, stamp duty, loan and legal costs, furniture, window coverings and moving costs are not included. Approval values include GST, so a derived rate does too; if you enter your own rate, use one that includes GST as well.