CalcTrace

Square Footage and Floor Area Calculator

Measure each room, pick its shape and get the total floor area in square metres and square feet. Rooms can be rectangles, L-shapes, triangles, circles or semicircles, and an optional rate per square metre or square foot turns the area into a cost.

Last updated .

Your rooms

Measurements in

Enter lengths in metres, for example 3.45.

For example a quote for flooring, carpet, painting a floor or cleaning, priced by area.

Result

Total floor area

–

–Square metres
–Square feet
–Rooms counted
–Estimated cost
Roomm²ft²

Floor area as measured inside the walls you enter. Areas quoted in plans, leases or sale listings may be measured to a different rule, such as to the outside of the walls.

Show the working

    How floor area is worked out

    Floor area is length times width for a rectangle, and every other room is handled by turning it into rectangles, triangles and circles, finding each area, and adding them. Square footage is the same quantity measured in feet. The only conversion you need is the definition of the foot.

    Rectangle: A = L × W

    L is the length and W the width of the room, measured wall to wall.

    L-shape: A = L × W − a × b

    L and W are the overall length and width of the rectangle that would enclose the whole room, and a and b are the length and width of the missing corner. Measuring this way needs only four tape readings and avoids having to decide where one part of the room ends.

    Triangle: A = ½ × b × h

    b is the base and h the height measured at right angles to the base, not along a sloping wall. This suits a corner cut off at an angle or the floor of a bay.

    Circle: A = π × d² ÷ 4   Semicircle: A = π × d² ÷ 8

    d is the diameter, the full width across the curve, and π is about 3.1416.

    Square feet = square metres ÷ 0.09290304

    One foot is exactly 0.3048 m under the international yard and pound agreement of 1959, so one square foot is 0.3048 × 0.3048 = 0.09290304 m², and one square metre is about 10.7639 ft². An optional cost is the total area multiplied by the rate, after converting the area to the unit the rate is quoted in.

    Worked example: three rooms

    The default figures describe a living room, an L-shaped kitchen and a bay.

    1. Living room, a rectangle. 5 m × 4 m = 20 m².
    2. Kitchen, an L-shape. The enclosing rectangle is 6 m × 4 m = 24 m². A corner 2 m by 1.5 m is not part of the room: 2 × 1.5 = 3 m². The kitchen is 24 − 3 = 21 m².
    3. Bay, a triangle. Base 3 m, depth 1 m: ½ × 3 × 1 = 1.5 m².
    4. Add. 20 + 21 + 1.5 = 42.5 m².
    5. Convert. 42.5 ÷ 0.09290304 = 457.47 ft².
    6. Cost, if wanted. At $45 per square metre, 42.5 × 45 = $1,912.50.

    You can check the L-shape by splitting it instead. A strip the full 6 m long and 4 − 1.5 = 2.5 m wide is 15 m², and the remaining part is 6 − 2 = 4 m long and 1.5 m wide, 6 m². Together that is again 21 m².

    In feet, a 12 ft by 15 ft bedroom is 180 ft², which is 180 × 0.09290304 = 16.72 m². A round room 3 m across is 3.1416 × 9 ÷ 4 = 7.07 m², and a semicircular bay of the same width is half that, 3.53 m².

    Common mistakes

    Converting with the length factor. A metre is about 3.28 feet, but a square metre is 3.28 × 3.28, or about 10.76 square feet. Multiplying 42.5 m² by 3.28 gives 139.4, less than a third of the true 457.47 ft².

    Using a sloping side as the height of a triangle. The height must be square to the base. For a right-angled corner, the two walls that meet at the right angle are the base and height; for any other triangle, measure the perpendicular distance, or work it out with the Pythagorean theorem.

    Mixing inches into decimal feet. 10 ft 6 in is 10.5 ft, not 10.6. Divide the inches by 12 before typing them in.

    Counting the same space twice. When you split a room into pieces, make sure the pieces only meet at an edge. The overall-rectangle method for an L-shape avoids this.

    Reading the result

    This is the area of the floor you measured. It does not include the thickness of walls, so it will be smaller than the gross floor area on a plan, which is often measured to the outside of external walls. Different industries and countries use different measurement rules for sale or lease areas, so when an area will be used in a contract, find out which rule applies. For buying materials, the measured area is the starting point, and you add an allowance for cutting and waste; the tile calculator does that for tiles.

    Precision: a tape reading that is 1 cm out on each side of a 5 m by 4 m room changes the area by about 0.09 m², under half of one per cent, so ordinary careful measuring is accurate enough.