CalcTrace

Tile and Flooring Calculator

Find how many tiles and boxes a floor or wall needs, or how many boxes of plank or laminate flooring to buy. Choose a straight or diagonal layout for the waste allowance, and for tiles get the grout by weight and the adhesive bags as well.

Last updated .

The surface and the covering

Units
What are you laying?
m
m
m²
Pattern
%

The pattern fills this in. Change it to suit the job: a small room, many corners or large tiles all mean more cuts. See choosing the allowance.

Tile

mm
mm
mm

Replace the tiles per box with the number on the box or price ticket, or leave it blank.

Grout (optional)

mm

Usually the tile thickness. 9 mm is an example.

kg/dm³

Typically 1.6 to 1.9 kg/dm³. Use the product's figure if it gives one.

kg

Adhesive (optional)

kg/m²
kg

4 kg/m² is an example, not a figure for any product. Adhesive use depends on the trowel notch and the tile, so use the coverage on your bag. Leave a grout or adhesive box blank to skip it.

Result

TilesAmount

Grout and adhesive are estimates from the joint size and the coverage you entered. Follow the manufacturer's instructions for the trowel and joint, and buy all tiles from one batch.

Show the working

    How the tile count is worked out

    Each tile takes up its own face plus half the joint around it, so the space one tile occupies is a little larger than the tile. Divide the area to be tiled by that footprint, then add an allowance for tiles that are cut, broken or wasted.

    Area to tile = L × W − D

    L and W are the length and width of the floor, or the width and height of a wall, and D is any part that will not be covered, such as a door, window or built-in cupboard.

    Tiles before waste = area to tile ÷ ((l + g) × (w + g))

    l and w are the tile's length and width and g is the grout gap, all in the same unit as the area. In metric, convert millimetres to metres by dividing by 1,000; in imperial, convert inches to feet by dividing by 12.

    Tiles to buy = tiles before waste × (1 + waste % ÷ 100), rounded up

    Boxes = tiles to buy ÷ tiles per box, rounded up

    Worked example: a 4 m by 3 m floor

    The floor is 4 m by 3 m, laid straight with 600 × 300 mm tiles and 3 mm joints, with the 10% straight-layout allowance and 8 tiles a box.

    1. Area to tile. 4 × 3 = 12 m², with nothing deducted.
    2. Footprint of one tile. (0.6 + 0.003) × (0.3 + 0.003) = 0.603 × 0.303 = 0.182709 m².
    3. Tiles before waste. 12 ÷ 0.182709 = 65.68.
    4. Add the waste. 65.68 × 1.10 = 72.25, rounded up to 73 tiles.
    5. Boxes. 73 ÷ 8 = 9.125, so 10 boxes, which hold 80 tiles.

    Ignoring the joint would give 12 ÷ 0.18 = 66.67 tiles before waste, about one more tile than needed. The joint matters more for small tiles and wide joints: with 100 mm mosaics and 3 mm joints the footprint is 6% larger than the tile itself.

    Imperial example

    A 12 ft by 10 ft floor is 120 ft². Tiles 12 in square with 1/8 in (0.125 in) joints occupy 12.125 × 12.125 = 147.02 square inches each, and a square foot is 144 square inches, so there are 144 ÷ 147.02 = 0.9795 tiles per square foot. That gives 120 × 0.9795 = 117.54 tiles before waste, 129.29 with 10% and therefore 130 tiles. Laid diagonally with the 15% allowance it is 135.17, so 136 tiles.

    Grout by weight

    Grout fills the joints, so the amount depends on how much joint there is in each square metre and how wide and deep it is. The usual formula, with every tile and joint size in millimetres, is:

    Grout (kg) = (L + W) ÷ (L × W) × J × D × ρ × A

    L and W are the tile length and width, J is the joint width, D is the joint depth (normally the tile thickness), ρ is the grout's density in kg/dm³ and A is the area in m². With millimetres in the first part, (L + W) ÷ (L × W) × J × D comes out in litres of joint per square metre, and one litre is one dm³, so multiplying by the density gives kilograms per square metre. Grout densities are typically between 1.6 and 1.9 kg/dm³; the calculator uses 1.7 unless you change it.

    For the example floor with joints 9 mm deep: (600 + 300) ÷ (600 × 300) = 0.005, and 0.005 × 3 × 9 = 0.135 litres of joint per square metre. At 1.7 kg/dm³ that is 0.2295 kg/m², so 12 m² takes 2.754 kg, which is one 5 kg bag. At the ends of the typical density range the same floor needs 2.592 kg at 1.6 and 3.078 kg at 1.9.

    Small tiles change the picture. 100 mm mosaics 6 mm thick with the same 3 mm joint need (200 ÷ 10,000) × 3 × 6 × 1.7 = 0.612 kg/m², about 2.67 times as much per square metre as the 600 × 300 tiles. The formula gives the joint volume only, so a little extra for mixing losses and cleaning off is sensible.

    Adhesive

    Adhesive (kg) = coverage (kg/m²) × area to tile; bags = kg ÷ bag size, rounded up

    At the example coverage of 4 kg/m², 12 m² takes 4 × 12 = 48 kg. In 20 kg bags that is 48 ÷ 20 = 2.4, so 3 bags. Real coverage depends on the trowel notch, which goes up with tile size, and on whether the back of each tile is buttered as well, so take the figure from the product's data for your tile and trowel.

    Plank and laminate flooring

    Planks and laminate are usually sold by the area one box covers, so there are no joints to allow for and no grout.

    Boxes = area × (1 + waste % ÷ 100) ÷ area per box, rounded up

    A 5 m by 4 m room is 20 m². Laid straight with 10% waste it needs 22 m², and with an example box of 2.2 m² that is 22 ÷ 2.2 = 10 boxes exactly, covering 22 m². Laid diagonally with 15% it needs 23 m², and 23 ÷ 2.2 = 10.45, so 11 boxes covering 24.2 m².

    The grid count: a cross-check

    The area method treats a cut tile as a fraction of a tile. In practice an off-cut can only be reused if it fits somewhere else. The grid count assumes that no off-cut is reused: along the length it takes the number of tiles needed to reach the far wall, rounded up, and the same across the width.

    Tiles per row = (L + g) ÷ (l + g), rounded up

    For the example, (4,000 + 3) ÷ 603 = 6.64, so 7 tiles along the length, and (3,000 + 3) ÷ 303 = 9.91, so 10 rows: 70 tiles. That sits between the 65.68 net figure and the 73 tiles with waste, which is a good sign that 10% is a sensible allowance here. When the grid count is higher than the area method with waste, increase the allowance. The grid count is shown only for a plain rectangle of tiles laid straight with nothing deducted.

    Choosing the waste allowance

    The pattern buttons fill in the figures many tilers start from: 10% for a straight layout and 15% for a diagonal one, because every edge tile on a diagonal is cut. They are starting points, not rules, which is why the box stays editable. Small rooms, rooms with many corners, large-format tiles, herringbone and natural stone with colour variation all push the figure up. A few spare tiles or planks from the same batch are worth keeping for later repairs, because a replacement batch can differ slightly in shade.