Area formulas for each shape
Area is the amount of flat surface inside a boundary, measured in square units: square metres, square centimetres and so on. Each shape has its own formula, but nearly all of them are a rectangle in disguise.
Rectangle: A = l × w
Triangle: A = ½ × b × h
Triangle from three sides (Heron): A = √(s(s − a)(s − b)(s − c)), where s = (a + b + c) ÷ 2
Circle: A = π × r²
Sector: A = (θ ÷ 360) × π × r²
Ellipse: A = π × a × b
Trapezium: A = ½ × (a + b) × h
Parallelogram: A = b × h
Rhombus: A = ½ × p × q
Regular polygon: A = n × s² ÷ (4 × tan(180° ÷ n))
In these, l and w are a length and width; b is a base and h the height measured at right angles to it; r is a radius and θ a sector’s angle in degrees; for the ellipse, a and b are the two semi-axes (half the longest and half the shortest width); for the trapezium, a and b are the two parallel sides; p and q are a rhombus’s diagonals; and n is the number of sides of a regular polygon, each of length s.
The family resemblance is worth seeing. A parallelogram is a rectangle with a triangle sliced off one end and moved to the other, so its area is still base times height. A triangle is half of a parallelogram. A trapezium is a rectangle whose width is the average of its two parallel sides.
Worked examples
A trapezium
A garden bed has parallel sides of 6 m and 10 m, set 4 m apart.
- Add the parallel sides: 6 + 10 = 16.
- Halve the sum to get the average width: 16 ÷ 2 = 8.
- Multiply by the height: 8 × 4 = 32 m².
A triangle from its three sides
When you cannot measure a height, Heron’s formula needs only the sides. For sides of 5, 6 and 7:
- Half the perimeter: s = (5 + 6 + 7) ÷ 2 = 9.
- Subtract each side from s: 9 − 5 = 4, 9 − 6 = 3 and 9 − 7 = 2.
- Multiply all four numbers: 9 × 4 × 3 × 2 = 216.
- Take the square root: √216 = 14.6969.
Three quick ones
A sector of radius 3 with an 80° angle covers (80 ÷ 360) × π × 9 = 6.2832. A regular hexagon with sides of 2 has area 6 × 4 ÷ (4 × tan 30°) = 10.3923. A rhombus with diagonals of 6 and 8 has area ½ × 6 × 8 = 24, and each of its sides is 5.
Getting the measurements right
Height means perpendicular height
In the triangle, parallelogram and trapezium formulas, h is measured straight across at right angles to the base, not along a sloping edge. A parallelogram with a base of 8 and a sloping side of 5 leaning at 30° is only 5 × sin 30° = 2.5 high, so its area is 20, not 40.
One unit throughout
A benchtop 2.5 m long and 80 cm deep is not 200 of anything. Convert first: 80 cm is 0.8 m, and 2.5 × 0.8 = 2 m². Remember too that area units convert by the square of the length factor. There are 100 cm in a metre but 10,000 cm² in a square metre.
Radius, not diameter
The circle and sector formulas square the radius, so entering the diameter by mistake makes the answer four times too large. The same squaring means that doubling every length of any shape multiplies its area by 4, a fact worth remembering when you scale a plan.
Shapes that are not on the list
Most real floor plans and plots break into pieces that are. An L-shaped room is two rectangles: a 5 m by 4 m part plus a 2 m by 3 m part is 20 + 6 = 26 m². A window with an arched top is a rectangle plus half a circle. Split the shape, work out each piece here, and add the results, or subtract when a piece is a cut-out. An oval running track or table top is close to an ellipse: semi-axes of 4 and 2.5 give π × 4 × 2.5 = 31.4159.
For triangles where you know angles instead of a height, the triangle calculator solves the whole triangle first.