How much paint a room needs
Paint is sold by volume but used by area, and the link between the two is the spread rate printed on the tin: the area one litre covers in one coat. Work out the area to paint, multiply by the number of coats, divide by the spread rate and add a small allowance.
Walls = 2 × (L + W) × H
Paintable area = walls − openings + ceiling (L × W, if painted)
L and W are the room's length and width, H is the wall height, and openings are doors, windows and anything else not painted. If the walls are not a simple box, enter their total area directly instead.
Paint = paintable area × coats ÷ spread rate × (1 + waste % ÷ 100)
In metric the spread rate is in m² per litre and the answer is in litres. In imperial it is in square feet per US gallon and the answer is in US gallons; a US gallon is exactly 3.785411784 litres, so 12 m²/L is the same as 488.95 sq ft per gallon.
Worked example: a 4 m by 3.5 m bedroom
The walls are 2.4 m high, there is 3.5 m² of door and window, two coats are planned, the tin says 12 m² per litre and 10% is allowed for waste.
- Walls. 2 × (4 + 3.5) × 2.4 = 15 × 2.4 = 36 m².
- Paintable area. 36 − 3.5 = 32.5 m².
- Area for two coats. 32.5 × 2 = 65 m².
- Paint before waste. 65 ÷ 12 = 5.42 litres.
- With waste. 5.42 × 1.10 = 5.96 litres.
- Cans. 5.96 litres fits in one can, and the smallest single can that holds it is 10 L, leaving 4.04 litres over.
Painting the 4 × 3.5 = 14 m² ceiling as well, in the same paint, makes 46.5 m², or 93 m² for two coats. That is 93 ÷ 12 = 7.75 litres, 8.525 litres with waste, and still one 10 L can, with 1.475 litres over. In practice ceilings are usually done in a separate ceiling paint, so run the calculator once for each product.
Imperial example
A 12 ft by 10 ft room with 8 ft walls has 2 × (12 + 10) × 8 = 352 sq ft of wall. Taking off 40 sq ft of openings leaves 312 sq ft, or 624 sq ft for two coats. If the label says 400 sq ft per gallon, that is 624 ÷ 400 = 1.56 gallons, and 1.72 gallons with 10% waste, which is 6.50 litres. The fewest cans is one 10 L can, which holds 2.64 gallons.
Choosing the cans
The can combination is chosen in two simple steps. First, the fewest cans: no can holds more than the largest size, so the count is the paint needed divided by the largest can, rounded up. Second, among all the ways to fill that many cans from the sizes you ticked, it picks the one with the least paint left over.
For 32 litres from 1, 4, 10 and 15 L cans, 32 ÷ 15 = 2.13, so three cans. Two 15s and a 4 hold 34 litres; one 15 and two 10s hold 35; two 15s and a 10 hold 40. The first leaves only 2 litres over, so that is the answer.
Fewest cans is not always least paint. For the bedroom above, two 4 L cans would hold 8 litres and leave 2.04 over, and a 4 L can plus two 1 L cans would leave just 0.04 litres over, but those are two and three cans instead of one. Untick the 10 and 15 L sizes to see the two-can mix, then compare prices: a big can is often cheaper per litre, and leftover paint is useful for touch-ups.
Where the estimate can go wrong
The spread rate is the figure that matters most. A rate of 12 m² per litre is a common figure for a smooth, sealed wall, but new plaster, bare timber, textured or dark surfaces, and a big change of colour can all need more paint or an extra coat. A primer or sealer has its own spread rate, so work it out as a separate product. Leave doors and windows in if they are small: the paint for cutting in and for the reveals around them roughly makes up for it. Keep the waste allowance for what stays in the tray, the roller and the bottom of the can.