How unit conversion works
Every category has one base unit from the International System of Units: the metre for length, the kilogram for mass, the square and cubic metre for area and volume, metres per second for speed and the second for time. Each other unit is defined as an exact number of base units. Converting is then two steps: into the base unit, and out again.
Value in base unit = value × size of the “from” unit
Result = value in base unit ÷ size of the “to” unit
The “size” of a unit is how many base units it contains. An inch is 0.0254 metres and a centimetre is 0.01 metres, so 1 inch is 0.0254 ÷ 0.01 = 2.54 centimetres. These sizes are definitions, not measurements: the inch is exactly 0.0254 metres, the pound exactly 0.45359237 kilograms and the nautical mile exactly 1,852 metres, so conversions between them have no rounding error beyond the digits displayed.
Temperature is different
Temperature scales do not share a zero, so multiplying is not enough. An offset has to be added or removed as well.
°F = °C × 9 ÷ 5 + 32
°C = (°F − 32) × 5 ÷ 9
K = °C + 273.15
°C is the temperature in degrees Celsius, °F in degrees Fahrenheit and K in kelvin. Water boils at 100 °C, which is 100 × 9 ÷ 5 + 32 = 212 °F and 373.15 K. The two scales cross at −40, which is the same temperature in Celsius and Fahrenheit. Nothing can be colder than 0 K, which is −273.15 °C or −459.67 °F, and the converter says so if you enter a lower value.
Worked examples
60 miles per hour in kilometres per hour.
- A mile is 1,609.344 metres and an hour is 3,600 seconds, so 1 mph is 1,609.344 ÷ 3,600 = 0.44704 metres per second.
- Into the base unit: 60 × 0.44704 = 26.8224 metres per second.
- A kilometre per hour is 1,000 ÷ 3,600 = 0.27778 metres per second.
- Out of the base unit: 26.8224 ÷ 0.27778 = 96.56 km/h.
An oven at 350 °F in Celsius. 350 − 32 = 318, and 318 × 5 ÷ 9 = 176.67 °C.
Units that share a name
US and imperial gallons, pints and fluid ounces
A US gallon is 3.785411784 litres and an imperial gallon is 4.54609 litres, so the imperial gallon is about 20% larger. The same gap carries into pints: 473.18 mL in the US and 568.26 mL in the imperial system. Fluid ounces run the other way. An imperial pint is divided into 20 fluid ounces and a US pint into 16, which makes the imperial fluid ounce slightly smaller, 28.41 mL against 29.57 mL. Fuel economy figures and old recipes are the usual places this causes mistakes.
Cups and spoons
A metric cup is 250 mL and a US cup is 236.59 mL. The Australian tablespoon is 20 mL, about a third larger than the US tablespoon of 14.79 mL, while the teaspoon is close to 5 mL in both (4.93 mL in the US). The converter lists each of these separately.
Tonnes and tons
A tonne is 1,000 kg. A US ton, or short ton, is 2,000 pounds, which is 907.18 kg. An imperial ton, or long ton, is 2,240 pounds, which is 1,016.05 kg.
Gigabytes and gibibytes
A gigabyte (GB) is 1,000,000,000 bytes. A gibibyte (GiB) is 1,024 × 1,024 × 1,024 = 1,073,741,824 bytes. Drive makers use the decimal unit, while some operating systems count in the binary unit and still label it “GB”, so a 500 GB drive is reported as 465.66 GiB. The gap widens with each prefix: 1 GB is 0.931 GiB and 1 TB is 0.909 TiB. Connection speeds are quoted in bits, and a byte is 8 bits, so a 100 megabit per second link moves 12.5 megabytes each second.
Practical points
A temperature change is not a temperature. A rise of 10 Celsius degrees is a rise of 18 Fahrenheit degrees, because only the 9 ÷ 5 scale factor applies to a difference. Putting 10 °C into the converter gives 50 °F, which is the reading on the thermometer, not the size of the change.
Months and years are not fixed lengths. The time category uses a 365-day year, a Julian year of 365.25 days, and an average month of 365.25 ÷ 12 = 30.4375 days. For the time between two real dates, use a date calculator instead.
Knots are already a speed. One knot is one nautical mile per hour, which is 1.852 km/h. “Knots per hour” would be an acceleration.
Do not keep more digits than you measured. The converter shows up to 12 significant figures so that exact definitions appear in full. A length measured to the nearest centimetre does not become more precise when it is converted to inches, so round the answer to match the measurement.