Volume is area times depth
Mulch, soil and compost are sold by volume, and a bed is a thin, flat layer, so the volume is the area of the bed multiplied by the depth of the layer. The depth must be in the same unit as the area: millimetres are divided by 1,000 to get metres, and inches by 12 to get feet.
Rectangle: A = L × W
Circle or ring: A = π × (D² − d²) ÷ 4
D is the outside diameter and d the diameter of any bare centre, such as the clear space around a tree trunk. With d = 0 this is the area of a full circle.
Triangle from three sides (Heron's formula): A = √(s × (s − a) × (s − b) × (s − c)), where s = (a + b + c) ÷ 2
a, b and c are the three edges and s is half the perimeter. The formula, attributed to Hero of Alexandria, needs no height, which suits a corner bed where the height is hard to measure. The three sides must form a triangle: the longest must be shorter than the other two added together.
Volume = A × depth × number of beds × (1 + extra % ÷ 100)
Bags = volume in litres ÷ litres per bag, rounded up
One cubic metre is 1,000 litres. In imperial units one cubic yard is 27 cubic feet.
Worked example: a 4 m by 1.5 m bed
- Area. 4 × 1.5 = 6 m².
- Depth in metres. 75 mm ÷ 1,000 = 0.075 m.
- Volume. 6 × 0.075 = 0.45 m³, which is 450 litres.
- Bags. With the example 50-litre bag, 450 ÷ 50 = 9 bags.
A ring around a tree with an outside diameter of 2 m and a bare centre 0.3 m across covers 3.1416 × (4 − 0.09) ÷ 4 = 3.07 m². At 75 mm that is 0.2303 m³, or 230.3 litres, so 5 bags of 50 litres. A corner bed with edges of 3, 4 and 5 m has s = 6 and an area of √(6 × 3 × 2 × 1) = 6 m², so it happens to need the same 0.45 m³ as the rectangle.
In imperial units, a 10 ft by 5 ft bed at 3 inches deep is 50 × 0.25 = 12.5 cubic feet, or 12.5 ÷ 27 = 0.463 cubic yards. In 2 cubic foot bags that is 6.25, so 7 bags.
How far a load goes
Turning the formula round gives the area a given volume covers: area = volume ÷ depth. One cubic metre spread 75 mm deep covers 1 ÷ 0.075 = 13.33 m², and spread 50 mm deep it covers 20 m². One cubic yard covers 324 square feet at 1 inch, so 108 square feet at 3 inches. This is useful when a supplier sells by the cubic metre or yard and you want to know whether a load is enough. The calculator shows the coverage for the depth you enter.
Settling and uneven ground
Bagged and bulk volumes are measured loose. Coarse mulch settles as it is walked on and as it breaks down, and soil and compost settle after watering, so the layer ends up thinner than when it was spread. Rather than guess a figure, the extra allowance lets you add your own: if you want a settled depth, increase the depth or add a percentage. Uneven ground has the same effect, since hollows take more material than the average depth suggests; measure the depth in a few places and use the average.
The right depth depends on the material and the plants. Garden guides commonly suggest somewhere around 50 to 100 mm (2 to 4 inches) for mulch, kept clear of stems and trunks, which is why the ring shape has a bare centre. Follow the advice for your plants and the product.
Common mistakes
Leaving the depth in millimetres. 6 × 75 = 450, which looks like a volume but is a thousand times too big. Convert the depth first.
Using the radius as the diameter. Measure straight across the widest part of a round bed. If you measure from the centre to the edge, double it before entering it.
Confusing cubic feet and cubic yards. A cubic yard is 27 cubic feet, not 3, because it is 3 feet in each of three directions.