CalcTrace

Horsepower Calculator

Convert engine horsepower between kilowatts, mechanical horsepower, metric horsepower (PS) and other units, work out engine power from torque and rpm, or get a rough horsepower estimate from a car’s weight and its quarter-mile time or trap speed.

Last updated .

What do you want to work out?

Task
Units

Result

Power

–

UnitPower
Show the working

    Horsepower, kilowatts and PS

    Power is the rate of doing work. The SI unit is the watt, one joule per second, and engine power is officially stated in kilowatts in Australia and Europe. “Horsepower” survives in everyday use, but there are several of them, and their exact sizes are fixed by definition:

    1 hp = 550 × 0.3048 m × 0.45359237 kg × 9.80665 m/s² per second = 745.69987158227022 W

    The foot (0.3048 m), the pound (0.45359237 kg) and standard gravity (9.80665 m/s²) are all exact, so the horsepower is too. Conversions follow: 1 kW = 1.341 hp = 1.360 PS, and 1 hp = 1.0139 PS. A 150 kW engine is 201.2 hp or 203.9 PS. When a brochure says “horsepower”, check which one it means, because the 1.4% gap matters in close comparisons.

    Power from torque and engine speed

    An engine turns a shaft. Torque is the twisting force on it and engine speed how fast it turns. Power is their product, with speed expressed as an angular velocity in radians per second:

    P = T × ω, where ω = 2π × N ÷ 60

    P is power in watts, T torque in newton-metres and N engine speed in revolutions per minute (rpm). In practical units this becomes:

    kW = N·m × rpm ÷ 9,549.3

    hp = lb·ft × rpm ÷ 5,252

    Where 5,252 comes from

    One mechanical horsepower is 550 ft·lbf per second, or 33,000 ft·lbf per minute. A torque of T pound-feet turning at N rpm does T × 2π × N foot-pounds of work each minute, because each revolution is 2π radians. Dividing by 33,000 gives hp = T × N × 2π ÷ 33,000 = T × N ÷ 5,252.1. A consequence: on any dyno chart in hp and lb·ft, the power and torque curves cross at 5,252 rpm. The metric constant 9,549.3 is 60,000 ÷ 2π, from the same reasoning with watts and seconds.

    Worked example

    1. Angular speed. An engine making 400 N·m at 4,000 rpm turns at 2π × 4,000 ÷ 60 = 418.88 radians per second.
    2. Power. 400 × 418.88 = 167,552 W, which is 167.6 kW.
    3. Horsepower. 167,552 ÷ 745.7 = 224.7 hp, or 227.8 PS.

    In imperial units, 300 lb·ft at 5,000 rpm is 300 × 5,000 ÷ 5,252 = 285.6 hp.

    Use torque and rpm measured at the same point on the curve. Peak torque and peak power usually occur at different engine speeds, so multiplying the peak torque by the redline speed overstates the power.

    Estimating horsepower from a quarter mile

    Drag racers have long used two empirical formulas to estimate power from a timeslip. Both take the weight in pounds including the driver.

    From elapsed time: hp = W ÷ (ET ÷ 5.825)³

    From trap speed: hp = W × (v ÷ 234)³

    W is the weight in pounds, ET the quarter-mile time in seconds and v the trap speed in mph. The elapsed-time formula is usually credited to the American automotive writer Roger Huntington and the trap-speed formula to Patrick Hale. Both are curve fits to real cars, not physics, so they are approximate. Trap speed is less affected by a poor launch or wheelspin, so it is generally the more reliable of the two for cars that struggle for traction.

    Example. A car weighing 1,500 kg with the driver (3,307 lb) runs 13.5 seconds at 165 km/h (102.53 mph). From ET: 3,307 ÷ (13.5 ÷ 5.825)³ = 265.7 hp. From trap speed: 3,307 × (102.53 ÷ 234)³ = 278.2 hp. The 5% gap is typical of how rough these estimates are. Altitude, temperature, gearing, tyres and aerodynamics all affect the result, and sources differ on whether it corresponds to power at the flywheel or at the wheels.