CalcTrace

Speed Calculator

Work out speed, distance or time from the other two, in kilometres per hour, metres per second, miles per hour, knots or feet per second, with the matching pace per kilometre and per mile. A second mode finds the true average speed of a trip made in several legs.

Last updated .

Your trip

What do you want to work out?
Solve for
Time
h
min
s

Leave any part empty for zero. Minutes and seconds over 59 are fine.

Result

Speed

–

Show the working

    Speed, distance and time

    speed = distance ÷ time    distance = speed × time    time = distance ÷ speed

    Speed here is the average speed over the distance: the distance covered divided by the time taken. The units must match, so kilometres and hours give km/h, metres and seconds give m/s. The calculator converts everything to metres and seconds first, using exact definitions: a mile is 1,609.344 m, a nautical mile 1,852 m and a foot 0.3048 m. From those, 1 m/s = 3.6 km/h, 1 mph = 1.609344 km/h = 0.44704 m/s, 1 knot = 1.852 km/h and 1 ft/s = 1.09728 km/h.

    pace (minutes per km) = 60 ÷ speed in km/h

    Pace is the time per unit of distance, the reciprocal of speed. Runners and walkers usually think in pace; drivers, sailors and pilots in speed.

    Worked examples

    1. Speed. 150 km in 1 h 45 min. 45 minutes is 0.75 h, so the time is 1.75 h and the speed is 150 ÷ 1.75 = 85.71 km/h. In other units that is 53.26 mph or 23.81 m/s.
    2. Distance. 3 h 20 min at 90 km/h. 20 minutes is a third of an hour, so 90 × 3.333 = 300 km.
    3. Time and pace. A marathon of 42.195 km at a steady 10 km/h takes 42.195 ÷ 10 = 4.2195 h. The 0.2195 h is 13.17 minutes, and the 0.17 minutes is 10.2 seconds, so about 4:13:10. The pace is 60 ÷ 10 = 6:00 per km, or 9:39 per mile.

    Why average speed is not the average of the speeds

    Drive 100 km at 100 km/h and then another 100 km at 50 km/h. The mean of the two speeds is 75 km/h, but the trip takes 1 h + 2 h = 3 h for 200 km, an average of 200 ÷ 3 = 66.67 km/h. The slow leg lasts twice as long, so it counts for more.

    average speed = total distance ÷ total time = (d1 + d2 + …) ÷ (d1 ÷ v1 + d2 ÷ v2 + …)

    Here d is each leg’s distance and v its speed. When every leg is the same distance this is the harmonic mean of the speeds, which is always less than or equal to the ordinary mean; the two only agree when all the speeds are equal. The ordinary mean is right only when each speed is held for the same length of time, not the same distance.

    A classic puzzle shows how far this goes. If you drive somewhere at 60 km/h, how fast must you return to average 120 km/h for the round trip? For a 60 km trip, 120 km/h over 120 km leaves exactly 1 hour, and the outward leg has already used it. No return speed is fast enough.

    Practical points

    Moving time and elapsed time differ. Stops for fuel, lights or rest add time but no distance, so the average speed for a journey is lower than the speed you mostly travel at. Use the elapsed time for a schedule and the moving time to describe your pace.

    Knots are already speeds. A knot is one nautical mile per hour, so “knots per hour” is not a speed.

    Decimal hours are not hours and minutes. 1.5 h is 1 h 30 min, not 1 h 50 min. The calculator takes hours, minutes and seconds separately so this never arises.