Pace, time and distance
Pace is the time it takes to cover one unit of distance, usually written as minutes and seconds per kilometre or per mile. It is the measure runners and walkers use because it answers the practical question: how long will the next kilometre take? Three quantities are tied together by one relationship, so knowing any two gives the third.
Pace = T ÷ D
Time: T = pace × D
Distance: D = T ÷ pace
T is the total time, D is the distance, and pace is in time per unit of distance. Work in seconds to avoid mistakes: a time of H hours, M minutes and S seconds is H × 3,600 + M × 60 + S seconds. Convert back to minutes and seconds at the end.
Speed = D ÷ T (with T in hours), so speed in km/h = 60 ÷ pace in minutes per km
Speed is the same information turned upside down: distance per unit of time. Treadmills show speed, so this conversion is the one to use indoors. A treadmill set to 12 km/h is running at 60 ÷ 12 = 5 minutes per kilometre.
Pace per mile = pace per km × 1.609344
One mile is exactly 1.609344 km, so a mile takes about 61% longer than a kilometre at the same effort.
Worked examples
Pace from a 10 km time of 50 minutes
- Time in seconds. 50 × 60 = 3,000 seconds.
- Divide by distance. 3,000 ÷ 10 = 300 seconds per kilometre, which is 5:00 per km.
- Per mile. 300 × 1.609344 = 482.8 seconds, which is 8:03 per mile.
- Speed. 10 km in 50 minutes is 10 ÷ (3,000 ÷ 3,600) = 12 km/h, or 7.46 mph.
The pace for a four-hour marathon
- Time in seconds. 4 × 3,600 = 14,400 seconds.
- Divide by distance. 14,400 ÷ 42.195 = 341.3 seconds per kilometre, which is 5:41 per km, or 9:09 per mile.
- Check. Holding exactly 5:41 for every kilometre gives 341 × 42.195 = 14,388 seconds, a finish of 3:59:48.
A half marathon in 1:45:00
1 hour 45 minutes is 6,300 seconds. 6,300 ÷ 21.0975 = 298.6 seconds, so the pace is 4:59 per km (8:01 per mile) and the speed is 12.06 km/h.
Standard race distances
| Event | Kilometres | Miles |
|---|---|---|
| 5 km | 5 | 3.11 |
| 10 km | 10 | 6.21 |
| Half marathon | 21.0975 | 13.11 |
| Marathon | 42.195 | 26.22 |
The marathon’s odd length comes from its imperial definition, 26 miles 385 yards. At 0.9144 metres to the yard that is 42,194.988 metres, which is rounded to 42.195 km. The half marathon is exactly half of that.
Reading the split table
A split is the time on the clock as you pass a marker. The table assumes an even pace, the same time for every kilometre or mile, because that is the simplest plan to follow and to check against a watch. If a race distance is not a whole number of kilometres or miles, the last row is the finish line and covers the short final stretch.
Real races are rarely perfectly even. Hills, wind, crowds at the start and tiredness all move individual splits around, and many runners plan to start a few seconds per kilometre slower than their average and finish faster. The even-pace table is still the useful reference: it shows at a glance whether you are ahead of or behind the plan at each marker.
Practical notes
- Small pace changes add up. One second per kilometre is about 42 seconds over a marathon and 21 seconds over a half marathon.
- GPS watches and course markers can differ. A course is measured along the shortest line a runner could take. Few people run that exact line, so a watch commonly shows a little more than the official distance, and its pace reading will look slightly faster than your pace against the markers.
- Seconds are rounded. Paces and times here are shown to the nearest second, but the calculation keeps the fractions, so split times will not drift.
- Walking works the same way. A brisk walk of 6 km/h is 60 ÷ 6 = 10 minutes per kilometre.