How the heat index is calculated
The body cools itself by sweating, and sweat cools only as fast as it can evaporate. Humid air slows evaporation, so a humid 32 °C day can feel hotter than a dry one. The heat index, also called the apparent temperature, expresses this as the temperature that would feel the same at a reference humidity. It comes from work by Robert Steadman in 1979, and the method below is the one the US National Weather Service (NWS) uses. It works in degrees Fahrenheit, so Celsius readings are converted first and the answer converted back.
Step 1: the simple formula
HI = 0.5 × [T + 61.0 + 1.2 × (T − 68.0) + 0.094 × RH]
T is the air temperature in °F and RH the relative humidity in per cent. The result is the average of the air temperature and a simple estimate, and it is consistent with Steadman’s results in mild conditions. If it is below 80 °F, it is the answer.
Step 2: the Rothfusz regression
If the simple result is 80 °F or more, the NWS uses the multiple regression published by Lans Rothfusz in 1990 (NWS Technical Attachment SR 90-23):
HI = −42.379 + 2.04901523 T + 10.14333127 RH − 0.22475541 T·RH − 0.00683783 T² − 0.05481717 RH² + 0.00122874 T²·RH + 0.00085282 T·RH² − 0.00000199 T²·RH²
Step 3: the two adjustments
If RH < 13% and T is 80 to 112 °F: subtract [(13 − RH) ÷ 4] × √{[17 − |T − 95|] ÷ 17}
If RH > 85% and T is 80 to 87 °F: add [(RH − 85) ÷ 10] × [(87 − T) ÷ 5]
These correct the regression at the dry and the very humid edges of its range, where it drifts away from Steadman’s values.
Where it is valid
The NWS gives the regression an error of ±1.3 °F and says it does not hold for extreme temperatures and humidities beyond the range of Steadman’s data. Its published chart covers 80 to 110 °F (about 27 to 43 °C) and 40 to 100% humidity, and the calculator notes when your conditions fall outside that. Heat index values also assume shade and a light wind: the NWS notes that full sunshine can raise them by up to 15 °F (about 8 °C). For air at 10 °C (50 °F) or below, cold is the concern rather than heat, and the calculator points to the wind chill index instead.
Worked example
Air temperature 35 °C, relative humidity 50%:
- Convert to Fahrenheit. 35 × 9 ÷ 5 + 32 = 95 °F.
- Simple formula. 0.5 × [95 + 61 + 1.2 × 27 + 0.094 × 50] = 0.5 × 193.1 = 96.55 °F. That is 80 or more, so the regression is used.
- Regression terms. −42.379 + 194.656 + 507.167 − 1,067.588 − 61.711 − 137.043 + 554.469 + 202.545 − 44.899 = 105.22 °F.
- Adjustments. Humidity is between 13% and 85%, so neither applies.
- Back to Celsius. (105.22 − 32) × 5 ÷ 9 = 40.7 °C, so it feels nearly 6 degrees hotter than the air.
For a humid example where an adjustment applies, take 80 °F (26.7 °C) at 95% humidity. The regression gives 86.40 °F and the high-humidity adjustment adds (95 − 85) ÷ 10 × (87 − 80) ÷ 5 = 1.4, so the heat index is 87.80 °F, or 31.0 °C.
The NWS categories
The NWS heat index chart groups values into four categories: Caution from 80 to 90 °F (26.7 to 32.2 °C), Extreme caution from 90 to 103 °F (32.2 to 39.4 °C), Danger from 103 to 124 °F (39.4 to 51.1 °C) and Extreme danger at 125 °F (51.7 °C) or more. These are that agency’s categories for the general public; heat warnings in Australia and elsewhere are issued by national weather services using their own measures, which can differ, so follow your local service.
Reading the result
Relative humidity changes during the day. It usually falls as the air warms, so pair each temperature with the humidity measured at the same time, not the morning figure.
Small changes near the top move the answer a lot. At high temperatures the regression is steep: at 95 °F, raising humidity from 50% to 60% lifts the heat index by about 8 °F.
The index is not body temperature. It describes how the conditions feel to a typical adult in shade, not what anyone’s temperature will be. Activity, clothing, sun and personal factors all change the effect.