Two ways to find a mass
Mass is the amount of matter in an object, measured in kilograms. When you cannot put the object on a scale, you can work it out from what you do know about it.
m = ρ × V
m is mass in kilograms, ρ (the Greek letter rho) is density in kilograms per cubic metre, and V is volume in cubic metres. Rearranged, ρ = m ÷ V and V = m ÷ ρ.
m = W ÷ g
W is weight, the force of gravity on the object, in newtons; g is the gravitational acceleration where it is measured, in metres per second squared. Rearranged, W = m × g and g = W ÷ m. Standard gravity is defined as exactly 9.80665 m/s², and the kilogram-force (9.80665 N) and pound-force (about 4.448 N) are defined from it.
The calculator converts every input to these base units first, applies the formula, and converts the answer back. The volume and mass units are exact: a litre is 0.001 m³, a cubic foot is 0.028316846592 m³ and a pound is 0.45359237 kg.
Worked examples
- A steel plate 1 m × 0.5 m × 10 mm. Volume: 1 × 0.5 × 0.01 = 0.005 m³. Mass: 0.005 × 7,850 = 39.25 kg, using a typical density for steel.
- 20 litres of petrol. 20 L is 0.02 m³. At about 740 kg/m³ the fuel has a mass of 0.02 × 740 = 14.8 kg, which is why a full 20 L jerry can is noticeably lighter than 20 L of water at about 20 kg.
- The volume of 1 kg of gold. V = m ÷ ρ = 1 ÷ 19,300 = 0.0000518 m³, or 51.81 cm³: a cube only about 3.7 cm along each side.
- Mass from a force. A force gauge reads 500 N. Under standard gravity the mass is 500 ÷ 9.80665 = 50.99 kg. Where local gravity is 9.78 m/s² the same reading means 500 ÷ 9.78 = 51.12 kg, about 0.3% more.
Typical densities
These are rounded, typical values at room temperature, and they are approximate. Real materials vary with temperature, moisture, alloy and grade, so for anything that matters choose “Custom” and enter the figure from the supplier or a measured value.
| Material | kg/m³ | g/cm³ |
|---|---|---|
| Air, sea level, 20 °C | 1.2 | 0.0012 |
| Pine timber, dry | 500 | 0.5 |
| Petrol | 740 | 0.74 |
| Fresh water | 1,000 | 1 |
| Concrete | 2,400 | 2.4 |
| Aluminium | 2,700 | 2.7 |
| Steel | 7,850 | 7.85 |
| Lead | 11,340 | 11.34 |
| Gold | 19,300 | 19.3 |
Common mistakes
Mixing volume units. A cubic metre is 1,000 litres, and a litre is 1,000 cubic centimetres. A density in kg/m³ multiplied by a volume in litres gives an answer 1,000 times too big. That is why 1 g/cm³, 1 kg/L and 1,000 kg/m³ are the same density.
Getting the volume of an awkward shape. For a box, multiply the three sides; for other shapes, use the volume calculator. For an irregular solid, lower it into water and measure the rise: the volume of water displaced is the volume of the object.
Treating a scale reading as a force. A bathroom or kitchen scale already shows mass, calculated on the assumption of standard gravity. Use the weight-and-gravity method only for a real force reading in newtons, kgf or lbf, such as from a spring balance, load cell or force gauge.
Hollow or mixed objects. m = ρV assumes the whole volume is one material. A hollow pipe, a sandwich panel or a bag of gravel needs the solid volume of each material, or an average (bulk) density measured for that product.