CalcTrace

Grade Calculator

Enter the mark and weight of each assessment you have finished to see your weighted average so far, then set a target to find the mark you need on whatever is left. The working is shown for every answer.

Last updated .

Your assessments

Enter only the assessments that have been marked. A mark can be a percentage, such as 72, or a score, such as 36/50. The weight is the share of the final result, so all the weights in a course add up to 100.

%

Leave this empty to see only your average so far.

Result

Mark needed on the remaining assessment

–

–Average so far
–Weight completed
–Points banked
–Best possible final
AssessmentMarkWeightPoints
Show the working

    How a weighted grade is calculated

    Most courses do not treat every assessment equally. A final exam might be worth 40% of the result and a short quiz only 5%, so a plain average of your marks gives the wrong answer. Each mark has to be scaled by its weight first. The scaled figure is the number of points that assessment adds to your final result out of 100.

    Points from one assessment = mark (%) × weight (%) ÷ 100

    Average so far = total points ÷ total weight completed × 100

    The mark is your score as a percentage. If it was given as a score, divide by the total first: 36 out of 50 is 36 ÷ 50 × 100 = 72%. The weight is the percentage of the final result that the assessment carries, as listed in the course outline. Total points is the sum of the points from every marked assessment, and total weight completed is the sum of their weights.

    The mark you need on what is left

    Whatever weight has not been marked yet is still to play for. To finish on a target, the remaining assessment has to supply the gap between the target and the points you have already banked.

    Remaining weight = 100 − total weight completed

    Mark needed = (target − total points) ÷ remaining weight × 100

    The target is the overall percentage you want for the course. If there are several assessments left, the answer is the average you need across them, weighted in the same way.

    Worked example

    A course has four assessments. Three have been marked: Assignment 1 scored 72% and is worth 20%, the mid-semester exam scored 65% and is worth 30%, and Assignment 2 scored 80% and is worth 10%. The final exam carries the rest. The target is 75% overall.

    1. Points from each assessment. 72 × 20 ÷ 100 = 14.4. 65 × 30 ÷ 100 = 19.5. 80 × 10 ÷ 100 = 8.
    2. Total points. 14.4 + 19.5 + 8 = 41.9 points, from 20 + 30 + 10 = 60% of the course.
    3. Average so far. 41.9 ÷ 60 × 100 = 69.83%.
    4. Remaining weight. 100 − 60 = 40%, which is the final exam.
    5. Mark needed. 75 − 41.9 = 33.1 points still required. 33.1 ÷ 40 × 100 = 82.75% on the final exam.

    Reading the result

    When the target is out of reach

    If the mark needed comes out above 100%, no result on the remaining assessment can get you there. In the example, a target of 85% would need 43.1 points from an exam that can supply at most 40, which is 107.75%. The best possible final result is the points banked plus the whole remaining weight: 41.9 + 40 = 81.9%. The calculator shows that ceiling so you can pick a realistic target.

    When the target is already secured

    If the mark needed is zero or negative, you already hold enough points. With 41.9 points banked, a target of 40% is secured before the final exam is sat. A target of 50% is not secured yet: it needs 8.1 more points, or 20.25% on the exam.

    Check for hurdle requirements

    Reaching the overall percentage is not always enough. Some courses set a hurdle, such as a minimum mark on the final exam or a requirement to submit every assessment, and failing the hurdle fails the course whatever the total. The course outline says whether one applies. The calculator works on the arithmetic only.

    Common mistakes

    Averaging the marks without the weights. The plain average of 72, 65 and 80 is 72.33%, but the weighted average is 69.83%, because the weakest mark came from the heaviest assessment. The gap grows when weights are very uneven.

    Using marks instead of percentages. A score of 36 on a test out of 50 is 72%, not 36%. Convert every score to a percentage, or type it as 36/50 and the calculator will convert it.

    Entering weights that do not match the course outline. If your completed weights add up to more than 100, one of them is wrong. A common cause is entering the marks available for a task, such as 50, instead of its share of the final result.

    Forgetting that results can be scaled. Some institutions adjust raw marks before final grades are released. The figure here is your raw weighted result, which is the best estimate available until grades are published.