CalcTrace

GPA Calculator

Add your courses, their credit points and the grade for each to get your grade point average. Choose the 4.0 letter scale or the 7-point scale, adjust the grade values to match your institution, and add your earlier GPA for a cumulative result.

Last updated .

Your courses

Grading scale

Credits are the credit points, units or credit hours the course is worth. Leave out courses that are graded pass or fail only.

Grade point values

These are common values, but institutions differ. Edit any of them to match your transcript or handbook.

For a cumulative GPA, enter the GPA you already have and the graded credit points it covers.

Result

GPA for these courses

–

–Cumulative GPA
–Credits counted
–Grade points earned
–Courses counted
CourseCreditsGradeValuePoints
Show the working

    How a GPA is calculated

    A grade point average is a weighted average. Each grade is turned into a number, the grade value, and each course counts in proportion to its credit points, so a large course moves the average more than a small one.

    Grade points for a course = credit points × grade value

    GPA = total grade points ÷ total credit points

    Credit points are the size of the course, called units or credit hours at some institutions. The grade value is the number your institution assigns to the grade you received. Total grade points is the sum of the first formula over every graded course, and total credit points is the sum of the credit points of those same courses. Courses marked only as pass or fail, withdrawals and exemptions normally carry no grade value and are left out of both totals.

    The two scales in this calculator

    On the 4.0 letter scale an A is worth 4.0, a B 3.0, a C 2.0, a D 1.0 and an F 0. Where plus and minus grades are used, a plus usually adds 0.3 and a minus takes off 0.3, so a B+ is 3.3 and an A− is 3.7. An A+ is normally capped at 4.0, although some institutions award 4.3.

    Many Australian universities use a 7-point scale, on which a High Distinction is 7, a Distinction 6, a Credit 5 and a Pass 4. Failing grades are where institutions differ most: some count every fail as 0, while others record a 3, 2 or 1 depending on how close the result was to a pass. The calculator lists all eight values, and every value on both scales can be edited under “Grade point values”. Your transcript or student handbook is the authority.

    Cumulative GPA

    To combine a new set of results with an existing GPA, convert the old GPA back into grade points, add the new ones, and divide by all the credit points together.

    Cumulative GPA = (earlier GPA × earlier credits + new grade points) ÷ (earlier credits + new credits)

    Earlier credits means only the credit points that counted towards the earlier GPA, which may be fewer than the credit points you have passed in total.

    Worked example

    A student on the 4.0 scale takes four courses: a 3-credit course with an A−, a 4-credit course with a B+, a 3-credit course with an A and a 3-credit course with a B.

    1. Grade points for each course. 3 × 3.7 = 11.1. 4 × 3.3 = 13.2. 3 × 4.0 = 12. 3 × 3.0 = 9.
    2. Total grade points. 11.1 + 13.2 + 12 + 9 = 45.3.
    3. Total credit points. 3 + 4 + 3 + 3 = 13.
    4. GPA. 45.3 ÷ 13 = 3.4846, which is 3.48 to two decimal places.

    Now suppose the student already had a GPA of 3.2 from 45 credits. The earlier grade points are 3.2 × 45 = 144. Adding the new results gives 144 + 45.3 = 189.3 grade points over 45 + 13 = 58 credits, and 189.3 ÷ 58 = 3.26.

    The same method works on the 7-point scale. Three 6-credit-point units graded 7, 6 and 5 and one 12-credit-point unit graded 4 give 42 + 36 + 30 + 48 = 156 grade points over 30 credit points, a GPA of 5.2.

    Mistakes and edge cases

    Averaging the grade values directly. In the worked example the plain average of 3.7, 3.3, 4.0 and 3.0 is 3.5, but the GPA is 3.48 because the B+ came from the largest course. The two figures only agree when every course has the same credit points.

    Forgetting that a fail still counts. A failed course adds its credit points to the bottom of the fraction and little or nothing to the top, which is why one fail does more damage than one low pass. Whether a repeated course replaces the fail or sits beside it is a matter of institutional policy.

    Expecting a cumulative GPA to move quickly. The more credits behind you, the less any one term can shift the average. With a 3.2 from 45 credits, a perfect 4.0 across 13 new credits lifts the cumulative figure only to 3.38.

    Mixing scales. A GPA of 5.2 out of 7 and a GPA of 3.48 out of 4 cannot be compared by simple proportion, because the grades underneath them are defined differently. If an application asks for a GPA on another scale, use the conversion method that organisation publishes.

    Rounding. This calculator rounds to two decimal places. Some institutions truncate instead, or report three places, so a result on a boundary may differ from your transcript in the last digit.