The formula behind the result
MET method: Energy (kcal) = MET × W × T
W is body weight in kilograms and T is the time spent in hours. MET stands for metabolic equivalent of task. It expresses how much energy an activity uses as a multiple of the energy used sitting quietly: an activity rated at 4 METs uses about four times the resting rate. By convention, 1 MET is taken as 1 kilocalorie per kilogram of body weight per hour, which is what makes the formula so short.
Kilojoules: Energy (kJ) = Energy (kcal) × 4.184
Australian food labels use kilojoules, so both units are shown.
Energy above resting (kcal) = (MET − 1) × W × T
The first formula gives the gross figure, which includes the 1 MET you would have used anyway by simply being alive for that time. Subtracting 1 from the MET value gives the extra energy the activity itself added.
Worked example
A person weighing 70 kg walks briskly for 45 minutes. Brisk walking is rated at about 4.3 METs.
- Time in hours. 45 ÷ 60 = 0.75 hours.
- Multiply. 4.3 × 70 × 0.75 = 225.75, or about 226 kcal.
- Kilojoules. 225.75 × 4.184 = 945 kJ.
- Above resting. (4.3 − 1) × 70 × 0.75 = 173 kcal.
So of the 226 kcal, about 173 kcal is extra energy from the walk and the remainder would have been used sitting still. Running at about 9.7 km/h, rated at about 9.8 METs, would use 9.8 × 70 × 0.5 = 343 kcal in 30 minutes for the same person.
Where MET values come from
The MET values in the activity list are approximate, rounded figures of the kind collected in the Compendium of Physical Activities, a reference compiled by Ainsworth and colleagues from studies that measured oxygen use during each activity. Every value is an average across the people tested, performing the activity at the pace described. The same activity done harder or easier has a different MET value, which is why walking, running and cycling appear several times at different speeds.
MET values are also used to sort activities into intensity bands. A common convention treats under 3 METs as light, 3 to under 6 METs as moderate and 6 METs or more as vigorous. The calculator shows the band for the MET value in use.
If you have a MET value from another source, such as a piece of gym equipment or a published table, choose “My own MET value” or simply type over the number.
Limits of the method
- The resting assumption. The convention of 1 kcal per kilogram per hour is a round figure. Real resting energy use varies with age, sex and body composition, and is lower than the convention for many people, so the formula tends to over-estimate for them.
- Intensity is self-described. Two people “cycling moderately” may be working at very different rates. Hills, wind, stops and rest periods are not captured.
- Skill and efficiency. A practised swimmer uses less energy to cover a lap than a beginner at the same speed.
- Body weight is a blunt input. The formula scales directly with weight, which suits weight-bearing activities such as walking better than supported ones such as cycling.
For these reasons the result is best used to compare activities and durations with each other, not as an exact count. Figures from watches and gym machines rest on similar assumptions and carry similar uncertainty.
Reading the result
Use the gross figure when adding up everything used in a day, and the above-resting figure when asking what an activity added on top of an ordinary day. Mixing the two leads to double counting: a daily estimate from the TDEE calculator already includes resting energy for all 24 hours, and its activity level already allows for regular exercise.