CalcTrace

Depreciation Calculator

Enter what an asset cost, what it will be worth at the end and how long it will be used. The calculator sets out its depreciation and book value for every year by three accounting methods side by side: straight-line, declining-balance and sum-of-the-years’-digits. These are accounting methods only; no country’s tax depreciation rules or rates are applied.

Last updated .

The asset

The residual value, also called salvage or scrap value, is what you expect the asset to be worth at the end of its useful life. Enter 0 if it will be worth nothing.

Declining-balance rate

Leave at 12 for a full first year. With fewer, the first year gets a part-year charge and the rest falls into one extra year at the end.

Method for the headline and working

Result

Depreciation in year 1, straight-line

–

–Depreciable amount
–Straight-line, each full year
–Declining-balance rate
–Sum of the years’ digits

Book value at the end of each year

Depreciation charged each year

YearStraight-lineDeclining balanceSum of digits

Book value at the end of each year

YearStraight-lineDeclining balanceSum of digits
Show the working

    Depreciation formulas

    Depreciation spreads the cost of an asset over the years it is used. All three methods here write off the same total, the depreciable amount, and differ only in how much of it lands in each year.

    Depreciable amount = C − R

    C is the cost of the asset and R is its residual value at the end of its useful life of n years.

    Straight-line: depreciation each year = (C − R) ÷ n

    Declining balance: depreciation in a year = book value at the start of the year × d

    d is a fixed yearly rate. The double-declining-balance method uses twice the straight-line rate, d = 2 ÷ n. The residual value is not subtracted first; instead, depreciation stops once the book value has fallen to R.

    Sum of the years’ digits: depreciation in year t = (C − R) × (n − t + 1) ÷ S, where S = n × (n + 1) ÷ 2

    S is the sum of the digits 1 to n. The first year takes n parts out of S, the second n − 1, and so on down to one part in the last year. In every method the book value is the cost less all the depreciation charged so far.

    Worked example

    A machine costs $20,000, is expected to be worth $2,000 after 5 years, and so has a depreciable amount of $18,000.

    1. Straight-line. $18,000 ÷ 5 = $3,600 every year. The book value falls to $16,400, $12,800, $9,200, $5,600 and finally $2,000.
    2. Double-declining balance. The rate is 2 ÷ 5 = 40%. Year 1: $20,000 × 0.4 = $8,000, leaving $12,000. Year 2: $12,000 × 0.4 = $4,800, leaving $7,200. Year 3: $2,880, leaving $4,320. Year 4: $1,728, leaving $2,592. In year 5, 40% of $2,592 would be $1,036.80 and would take the book value to $1,555.20, below the residual, so the charge is cut to $592 and the book value stops at $2,000.
    3. Sum of the years’ digits. S = 5 × 6 ÷ 2 = 15. Year 1 takes 5 ÷ 15 of $18,000, which is $6,000. The following years take $4,800, $3,600, $2,400 and $1,200, and the book value falls to $14,000, $9,200, $5,600, $3,200 and $2,000.

    Each column adds up to $18,000. What differs is the first year: $3,600 by straight-line, $6,000 by sum of the years’ digits and $8,000 by double-declining balance.

    What the three patterns mean

    Straight-line treats every year of use as equal, which suits assets that give much the same service throughout, such as furniture or a building fit-out. The two accelerated methods charge more in the early years and less later. That pattern fits assets that lose usefulness fastest when new, and it tends to even out the total yearly cost of owning something whose repair bills rise as it ages.

    The choice changes when the expense is recognised, not how much. A higher charge now means lower reported profit now and higher reported profit later, with the same total over the asset’s life. Book value is an accounting figure: it is cost less depreciation to date, not an estimate of what the asset would sell for.

    Declining balance and the residual value

    Because declining balance takes a percentage of whatever is left, it never reaches zero by itself. The $20,000 machine at 40% a year would still be on the books at $20,000 × 0.6⁵ = $1,555.20 after 5 years. Two things follow. If the residual value is higher than that, as in the example, the method hits the residual early and the last charge is cut short. If the residual value is lower, a balance is left over at the end of the life. The calculator writes that balance off in the final year unless you untick the box, in which case the schedule shows the pure method and the amount left undepreciated.

    There is one rate that arrives at the residual value exactly:

    d = 1 − (R ÷ C)1 ÷ n

    For the example that is 1 − 0.10.2 = 36.90% a year. The formula cannot be used with a residual value of zero, since it would give a rate of 100%.

    A part-year first period

    An asset bought partway through a financial year is usually depreciated only for the months it was in use. Suppose the machine was in use for 9 months of the first year.

    1. Straight-line. Year 1 is $3,600 × 9 ÷ 12 = $2,700. Years 2 to 5 are $3,600 each, and the missing 3 months fall into a sixth year: $900.
    2. Declining balance. Year 1 is $20,000 × 0.4 × 9 ÷ 12 = $6,000. From then on the full rate applies to the opening book value, so year 2 is $14,000 × 0.4 = $5,600.
    3. Sum of the years’ digits. Each of the asset’s own years straddles two financial years. Year 1 is 9 ÷ 12 of the first slice: $6,000 × 9 ÷ 12 = $4,500. Year 2 is the last 3 months of the first slice plus 9 months of the second: $1,500 + $3,600 = $5,100.

    Limits

    The useful life and the residual value are estimates, and the whole schedule depends on them. The calculator works in whole years plus an optional part-year start, and does not cover the units-of-production method, revaluations, impairment, or a change of estimate partway through an asset’s life.

    These are general accounting methods. Depreciation for tax is set by each country’s own rules, which often fix the rates, lives or methods that may be used and may differ from the figures in a set of accounts. None of those rules are built in here, so do not use this schedule as a tax calculation.