CalcTrace

Body Surface Area Calculator

Estimate body surface area (BSA), the total area of the skin, from height and weight. Five published formulas are shown side by side so you can see how closely they agree: Mosteller, Du Bois, Haycock, Gehan-George and Boyd.

Last updated .

Your details

Units
cm
kg

Measure height without shoes and weight in light clothing. The result is for general information. Medicine doses based on body surface area are worked out and checked by clinicians.

Your result

Body surface area, Mosteller formula

– m²

Enter height and weight to see the body surface area.

–Average of the five, m²
–Lowest, m²
–Highest, m²
–Spread, lowest to highest
FormulaBSA, m²Against Mosteller

Do not use this page to work out a dose of any medicine. Dosing decisions belong to the prescribing clinician and pharmacist, who choose the formula, check the inputs and take the whole clinical picture into account.

Show the working

    The formulas behind the result

    Skin area cannot be measured with a tape, so it is predicted from height and weight. Each formula below was fitted to direct measurements of a group of people. In all of them, W is body weight in kilograms, H is height in centimetres and the answer is in square metres (m²).

    Mosteller (the main result)

    BSA = √(W × H ÷ 3600)

    Published by R. D. Mosteller in 1987 as a simplification that can be done on any calculator with a square-root key. Its simplicity has made it one of the most widely used formulas.

    Du Bois

    BSA = 0.007184 × W0.425 × H0.725

    Published by Du Bois and Du Bois in 1916 from measurements of a small number of people. It is the oldest formula still in routine use and the one much of the later research was compared against.

    Haycock

    BSA = 0.024265 × W0.5378 × H0.3964

    Published by Haycock, Schwartz and Wisotsky in 1978. Their measurements included infants and children as well as adults, so it is often preferred in paediatrics.

    Gehan-George

    BSA = 0.0235 × W0.51456 × H0.42246

    Published by Gehan and George in 1970, fitted to a larger set of directly measured people than Du Bois had available.

    Boyd

    BSA = 0.0003207 × H0.3 × G(0.7285 − 0.0188 × log10 G)

    Published by Edith Boyd in 1935. G is body weight in grams, which is W × 1000. The exponent on weight shrinks slightly as weight rises, which is what sets this formula apart from the other four.

    Worked example

    A person who is 170 cm tall and weighs 70 kg, using Mosteller:

    1. Multiply weight by height. 70 × 170 = 11,900.
    2. Divide by 3600. 11,900 ÷ 3600 = 3.3056.
    3. Take the square root. √3.3056 = 1.818 m².

    For Du Bois, 700.425 = 6.0837 and 1700.725 = 41.407, so 0.007184 × 6.0837 × 41.407 = 1.810 m². The other three give 1.826 m² (Haycock), 1.831 m² (Gehan-George) and 1.835 m² (Boyd). The five answers span 0.025 m², a spread of about 1.4%, and their average is 1.824 m².

    What body surface area is used for

    In every one of these, the BSA figure is only one input to a clinical judgement. Which formula is used, how the result is rounded and whether a dose is adjusted or capped are decisions for the treating team. This page is for understanding the calculation, not for making those decisions.

    How to read the result

    For adults of ordinary build the five formulas usually agree to within a few per cent, as the example shows. They disagree more at the extremes: for very small children, and for adults who are very light or very heavy for their height, because few such people were among those originally measured. If a figure matters, it matters which formula produced it, so quote the formula name alongside the number.

    BSA changes slowly with weight. In the example, gaining 5 kg to 75 kg moves the Mosteller result from 1.818 to 1.882 m², a rise of about 3.5% for a 7% change in weight. That steadiness is one reason BSA has been preferred to weight alone for scaling.

    Accurate inputs matter more than the choice of formula. Use a recent measured height and weight, not remembered ones.